Choose a state

A11/R17 A-11 Steel and Aluminum Erection (Commercial) and R-17 Structural Steel and Aluminum (Residential) (2019-01-02)

A-11 Steel and Aluminum Erection - Field fabrication, erection, repair, and alteration of architectural and structural steel and aluminum materials common to the industry, including field layout, cutting, assembly and erection by welding, bolting, wire typing or riveting.

R-17 Structural Steel and Aluminum - Installation and repair of architectural and structural shapes and members common to the industry, including reinforcing steel which may be used as structural members for buildings, equipment, and structures.

The trade test is considered equivalent for these classifications and upon passing the CBME and trade exam, either license classification may be applied for without further testing. 

Questions - 50
Minimum Passing Score of 70%
Time Allowed - 120 Minutes

The reference material listed below was used to prepare the questions for this examination.  The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available.  For Code questions, the examinations will be based only on the edition of the Code book that is listed.

Sign Up for Exam Prep
These products apply to test outline dated 2019-01-02

Click Here to View the Candidate Information Bulletin Click Here to View the Candidate Information Bulletin



Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.

  • Closed Book In Stock

    SDI (Manual of Construction with Steel Deck) Edition 3

    Publication Year: 2017
    3RD Edition

    $50.00

     

    The new Third Edition of the Steel Deck Institute Manual of Construction with Steel Deck (MOC3) continues the tradition established by earlier editions to provide information necessary for the proper field usage of steel deck. This edition is reformatted for easier use with updated references, including those for the SDI QA/QC Standard for Quality Control and Quality Assurance for Installation of Steel Deck.

  • Closed Book In Stock

    Technical Digest No. 9 - Handling and Erection of Steel Joists and Joist Girders

    3rd Edition
    Publication Year: March 2006

    $45.00

    This updated Technical Digest contains a thorough coverage of the proper handling and erection procedures to be employed in the field to make certain that SJI joist products are not damaged, that they perform as specified, and above all, to ensure the safety of the erectors. The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturer’s plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are penalized erection and common field issues. This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9. General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.

  • Closed Book In Stock

    ASME B30.5 Mobile and Locomotive Cranes

    Publication Year: 2007
    Edition

    $130.00

    ASME B30.5 is widely respected and applied throughout the building and construction industry. It addresses crawler cranes, locomotive cranes, wheel-mounted cranes, and any variations thereof that retain the same fundamental characteristics and are powered by internal combustion engines or electric motors. The scope of this Safety Standard includes only cranes of the above types that are powered by internal combustion engines or electric motors. Side boom tractors and cranes designed for railway and automobile wreck clearance, digger derricks, cranes manufactured specifically for, or when used for, energized electrical line service, knuckle boom, trolley boom cranes, and cranes having a maximum rated capacity of one ton or less are excluded.

  • Closed Book In Stock

    Specification For Structural Joints Using ASTM A325 or 490 Bolts, 2004

    Publication Year: 2004

    $0.00

    The information presented in this publication has been prepared in accordance with recognized engineering principles and is for general information only. While it is believed to be accurate, this information should not be used or relied upon for any specific application without competent professional examination and verification of its accuracy, suitability, and applicability by a licensed engineer, architect or other design professional. The publication of the material contained herein is not intended as a representation or warranty on the part of the research council on structural connections or of any other person named herein, that this information is suitable for any general particular use or of freedom from infringement of any patent or patents. Anyone making use of his information assumes all liability arising form such use.

    *This title is now available as a free PDF from the publisher. CLICK HERE to access the PDF*

  • Closed Book In Stock

    Handbook of Rigging: For Construction and Industrial Operations

    Publication Year: 2009
    5th Edition

    $120.00

    Since 1957 successive editions of the Handbook of Rigging for Construction and Industrial Operations have delivered proven solutions for erecting reliable rigs and scaffolds for plants and factories, loading docks, mines and ports, and construction and demolition sites. Complete with extensive coverage of relevant OSHA regulations plus the author's own expert advice on safe practices, this definitive guide shows you how to select and use: rigging tools--fiber and wire-strand rope, slings and hitches, end attachments and fittings, and blocks, sheaves, reeving, and drums-scaffolding and ladders--both manual and powered swinging and suspended scaffolds, wood and metal stationary scaffolds, specialized scaffolds, and portable ladders, rigging machinery--derricks and cranes, overhead hoists, personnel/material hoists, and helicopters, rigging accessories--jacks, rollers, and skids plus safety belts, lifelines, and nets.

  • Open Book In Stock

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2024

    Publication Year: 2024

    $32.00

    The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.

  • Open Book In Stock

    Blank Quick Reference Tabs

    $13.00

  • Closed Book In Stock

    Modern Welding 2024

    Publication Year: 2024
    13th Edition

    $150.00

    Modern Welding is a comprehensive text that has long been the standard for teaching theory, fundamentals, equipment, and techniques of welding technology, with enough information to span a two-year curriculum. Covering all of the information required for complete AWS SENSE Level 1 and Level 2 certification, this text includes shielded metal arc welding, gas metal arc welding, flux cored arc welding, gas tungsten arc welding, oxyfuel gas welding and cutting, various thermal cutting processes, testing and inspection, welding symbol interpretation, and print reading. The text also includes Nonstandard Terminology features, introducing students to the jargon commonly used in the welding industry to help them communicate effectively on the job. 

    • Includes 30 step-by-step procedures that guide students through challenging welding-related operations
    • Features a time-saving Quick Reference Table of Contents that directs students to the specific reference tables in the book
    • Presents safety information in bold red type throughout the text to reinforce and highlight this critical information
  • Closed Book In Stock

    Principles and Practices of Commercial Construction 10th Edition

    10th Edition

    $165.00

    A practical, well-rounded approach to modern construction principles and practices

    Principles and Practices of Commercial Construction teaches students how to apply design theory to the construction process, providing crucial working knowledge for contractors managing subcontractors. Progressing from basic to advanced material, the text appears on the approved reference list for numerous states requiring contractors to pass licensing exams. Its flexible organization gives instructors the option of teaching each chapter on a standalone basis in a range of construction, architecture, and engineering courses. The 10th edition expands its discussion of practical applications in structural design projects and adds practice opportunities preparing students for licensing exams.