Choose a state

C-2D (2022-10-04)

The installation and maintenance of: (1) Material and fixtures to create sanitary conditions in buildings by providing a permanent means for a supply of safe water and any sanitary waste and vent systems that are required to ensure the appropriate removal of waste from these buildings; (2) Drainage systems for roofs; (3) Hydronic heating systems not exceeding 200,000 British thermal units; (4) Systems of landscape irrigation; (5) Systems to heat potable water, including, without limitation, solar equipment; (6) A permanent means to supply gas for residential and industrial purposes; and (7) Pipes for compressed air, vacuums and gases for medical use. In addition to any work specified in this paragraph, a person who holds a subclassification C-1d license may install piping for water and gas beginning at the edge of a building and ending at the utility meter for that building.

80 Questions
70% Minimum Passing Score
3 Hours

The reference material listed below was used to prepare the questions for this examination.  The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available.  For Code questions, the examinations will be based only on the edition of the Code book that is listed.

These products apply to test outline dated 2022-10-04

Click Here to View the Candidate Information Bulletin Click Here to View the Candidate Information Bulletin



Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.

  • Open Book In Stock

    Blank Quick Reference Tabs

    $13.00

  • Closed Book In Stock

    Mathematics for Plumbers and Pipefitters 8th Edition

    8th Edition

    $210.00

    Fully updated for optimal learning, Mathematics for Plumbers and Pipe-fitters, 8E remains a trusted resource for essential math concepts in the plumbing and pipe-fitting trades. With an emphasis on real-world examples that will prepare readers to successfully transfer their knowledge to on-the-job situations, this book utilizes the most currently used fitting materials to demonstrate key concepts. Simplified, clear explanations and a straightforward approach, combined with new units on changes of state, pressure and heat, and mechanical advantage, make this an ideal tool for anyone entering the field.

  • Closed Book In Stock

    Solar Water and Pool Heating Design and Installation Manual

    Publication Year: 2006

    $45.00

    The intent of this manual is to equip the reader with the knowledge and skills needed todesign, install, operate and maintain the most common types of solar water heating systems.The manual serves as the textbook for the solar thermal course sponsored and conducted bythe Florida Solar Energy Center. It also functions as a study guide for those intending to takelicensing or certification exams.The manual presents an overview of solar thermal applications, provides basic informationon the principles of solar energy, reviews solar thermal technologies, and provides detailedinstruction on the safe, efficient installation of solar water heating and pool heating systems.The manual is divided into six sections, with each separated into individual. 

  • Closed Book In Stock

    Pipe Welding Procedures

    2nd Edition
    Publication Year: 2003

    $95.00

    A standard reference for decades, this new edition of Pipe Welding Procedures continues to reinforce the welder's understanding of procedures. Drawing on his extensive practical and teaching experience in the field, the author describes in detail the manipulating procedures used to weld pipe joints. You will find useful information on heat input and distribution, essentials of shielded metal-arc technology, distortion, pipe welding defects, welding safety, essentials of welding metallurgy, and qualification of the welding procedure and the welder.

  • Closed Book In Stock

    Pipefitter's Handbook, 1967 3rd Edition

    3rd Edition
    Publication Year: 1967

    $55.00

    Compact and pocket-sized, this handy reference contains thousands of facts and figures relevant to pipefitters, steamfitters-anyone concerned with layout and installation of pipe.

  • Closed Book In Stock

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2024

    Publication Year: 2024

    $32.00

    The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.

  • Open Book Out of Stock

    Uniform Plumbing Code 2012

    2012 Edition

    $0.00

    The UPC established minimum requirements and standards for the protection of the public health, safety and welfare. 101.2 Scope. The provisions of this code shall apply to the erection, installation, alteration, repair, relocation, replacement, addition to, use, or maintenance of plumbing systems within this jurisdiction. Includes all potable water, building supply, and distribution pipes; all plumbing fixtures and traps; all drainage and vent pipes; and all building drains, and building sewers, including their respective joints and connections, devices, receptors, and appurtenances within the property lines of the premises and shall include potable water piping, potable water treating or using equipment, medical gas and medical vacuum systems, liquid and fuel gas piping, and water heaters and vents for same.

    THIS BOOK IS NO LONGER IN PRINT AND IS NO LONGER AVAILABLE TO PURCHASE

    eBook Version: http://epubs.iapmo.org/2012/UPC/

  • Open Book In Stock

    Uniform Mechanical Code 2012

    $115.00

    Uniform Mechanical Code 2012 provides complete requirements for the installation and maintenance of heating, ventilating, cooling and refrigeration systems, while at the same time allowing latitude for innovations and new technologies.

  • Open Book In Stock

    NFPA 54: National Fuel and Gas Code 2012 Edition

    Publication Year: 2012

    $150.00

    2012 NFPA 54: National Fuel Gas Code provides revised, industry accepted guidance for the safe installation and operation of gas piping systems, appliances, equipment, and accessories.

  • Open Book In Stock

    NFPA 58: Liquefied Petroleum Gas Code 2014

    Publication Year: 2014

    $150.00

    Liquefied Petroleum Gas Code provides minimum safety requirements for all liquefied petroleum gas (propane) installations, from small cylinders installed at residences to large bulk storage facilities that can exceed 100,000 gallons. The code includes minimum requirements for safe handling during LP gas transfer, including operator qualifications, maximum filling quantity in containers, and pre-transfer inspections to ensure containers are fit for continued service.

  • Closed Book In Stock

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2023

    $29.50

    All Federal Construction Regulations (29 CFR 1926) are included in this “perfect bound” book in an easy-to-read, two-color layout.

    All 29 CFR 1926 regulations for construction industry are included along with the following items:

    29 CFR 1903 regulations covering inspections, citations, and penalties
    29 CFR 1904 regulations covering recording and reporting occupational injuries and illnesses
    OSHA keyword dictionary
    Easy to find OSHA interpretations

  • Closed Book In Stock

    Modern Hydronic Heating & Cooling for Residential and Light Commercial Buildings 4th Edition

    4th Edition

    $250.00

    From simple applications to multi-load and multi-temperature systems, this one-of-a-kind, comprehensive text prepares readers to use the latest hydronics to create systems that deliver the ultimate in comfort, reliability and energy efficiency. Abundantly illustrated with product and installation photos and hundreds of detailed, full-color schematics, MODERN HYDRONIC HEATING, Fourth Edition, transforms engineering-level design information into practical applications useful for technical students and heating professionals alike. The revised edition features the latest design and installation techniques for residential and light commercial hydronic systems, including use of renewable energy heat sources such as air-to-water and geothermal heat pumps, hydraulic separation, variable speed circulators, distribution efficiency, heat exchangers, buffer tanks, heat metering, hydronic cooling, system balancing and proper system documentation. Anyone involved in the heating trade will benefit from this preeminent resource of the North American heating industry, which is equally well-suited for formal education courses, self-study or on-the-job reference.