Choose a state
A11/R17 A-11 Steel and Aluminum Erection (Commercial) and R-17 Structural Steel and Aluminum (Residential) (2019-01-02)
A-11 Steel and Aluminum Erection - Field fabrication, erection, repair, and alteration of architectural and structural steel and aluminum materials common to the industry, including field layout, cutting, assembly and erection by welding, bolting, wire typing or riveting.
R-17 Structural Steel and Aluminum - Installation and repair of architectural and structural shapes and members common to the industry, including reinforcing steel which may be used as structural members for buildings, equipment, and structures.
The trade test is considered equivalent for these classifications and upon passing the CBME and trade exam, either license classification may be applied for without further testing.
Questions - 50
Minimum Passing Score of 70%
Time Allowed - 120 Minutes
Closed Book These books are for pre-test study only and are not available for use during the test.
Publication Year: 2017
The new Third Edition of the Steel Deck Institute Manual of Construction with Steel Deck (MOC3) continues the tradition established by earlier editions to provide information necessary for the proper field usage of steel deck. This edition is reformatted for easier use with updated references, including those for the SDI QA/QC Standard for Quality Control and Quality Assurance for Installation of Steel Deck.
Publication Year: March 2006
This updated Technical Digest contains a thorough coverage of the proper handling and erection procedures to be employed in the field to make certain that SJI joist products are not damaged, that they perform as specified, and above all, to ensure the safety of the erectors. The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturer’s plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are penalized erection and common field issues. This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9. General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.
Publication Year: 2013
This up-to-date and practical text offers a complete and well-rounded approach to modern construction principles and practices. Each chapter, while complementary to other chapters, can be taught on a standalone basis, maximizing instructional flexibility in diverse construction, architecture, and engineering courses. PRINCIPLES & PRACTICES OF COMMERCIAL CONSTRUCTION, 9th Edition shows how to apply design theory to the final constructed process, and provides crucial working knowledge for all contractors who must effectively manage subcontractors. Progressing from basic through advanced material, it enables students to follow design specifications through a complete project. Since this text is on the approved reference list for numerous states that require contractors to pass licensing exams, it offers even more value for students who may need to pass these exams later. This edition's enhancements include improved chapter organization; a new introductory chapter; and valuable new coverage of Proctor curves.
Publication Year: 2007
ASME B30.5 is widely respected and applied throughout the building and construction industry. It addresses crawler cranes, locomotive cranes, wheel-mounted cranes, and any variations thereof that retain the same fundamental characteristics and are powered by internal combustion engines or electric motors. The scope of this Safety Standard includes only cranes of the above types that are powered by internal combustion engines or electric motors. Side boom tractors and cranes designed for railway and automobile wreck clearance, digger derricks, cranes manufactured specifically for, or when used for, energized electrical line service, knuckle boom, trolley boom cranes, and cranes having a maximum rated capacity of one ton or less are excluded.
Publication Year: 2004
The information presented in this publication has been prepared in accordance with recognized engineering principles and is for general information only. While it is believed to be accurate, this information should not be used or relied upon for any specific application without competent professional examination and verification of its accuracy, suitability, and applicability by a licensed engineer, architect or other design professional. The publication of the material contained herein is not intended as a representation or warranty on the part of the research council on structural connections or of any other person named herein, that this information is suitable for any general particular use or of freedom from infringement of any patent or patents. Anyone making use of his information assumes all liability arising form such use.
*This title is now available as a free PDF from the publisher. CLICK HERE to access the PDF*
Publication Year: 2009
Since 1957 successive editions of the Handbook of Rigging for Construction and Industrial Operations have delivered proven solutions for erecting reliable rigs and scaffolds for plants and factories, loading docks, mines and ports, and construction and demolition sites. Complete with extensive coverage of relevant OSHA regulations plus the author's own expert advice on safe practices, this definitive guide shows you how to select and use: rigging tools--fiber and wire-strand rope, slings and hitches, end attachments and fittings, and blocks, sheaves, reeving, and drums-scaffolding and ladders--both manual and powered swinging and suspended scaffolds, wood and metal stationary scaffolds, specialized scaffolds, and portable ladders, rigging machinery--derricks and cranes, overhead hoists, personnel/material hoists, and helicopters, rigging accessories--jacks, rollers, and skids plus safety belts, lifelines, and nets.
Publication Year: 2020
Modern Welding is a comprehensive text that has long been the standard for teaching theory, fundamentals, equipment, and techniques of welding technology. This text provides thorough coverage of common welding and cutting processes, including gas tungsten arc welding, gas metal arc welding, flux-cored arc welding, shielded metal arc welding, oxyfuel gas welding and cutting, plasma arc cutting, and resistance welding of ferrous and non-ferrous metals. The text also includes extensive instruction in welding symbol interpretation, metallurgy and heat treatments, weld testing and inspection, and employment in the welding field.
Prepares students for AWS SENSE Level 1 and Level 2 certification, with enough information to cover a two-year curriculum.
Strong emphasis is placed on all aspects of safety, including respiratory protection, to ensure that safe practices are followed from education to career.
Sections may be taught sequentially or independently, allowing for flexible customization to match your curriculum.
Photos, art, and videos have been designed to convey maximum learning.
A practical, well-rounded approach to modern construction principles and practices
Principles and Practices of Commercial Construction teaches students how to apply design theory to the construction process, providing crucial working knowledge for contractors managing subcontractors. Progressing from basic to advanced material, the text appears on the approved reference list for numerous states requiring contractors to pass licensing exams. Its flexible organization gives instructors the option of teaching each chapter on a standalone basis in a range of construction, architecture, and engineering courses. The 10th edition expands its discussion of practical applications in structural design projects and adds practice opportunities preparing students for licensing exams.
Publication Year: 2022
All Federal Construction Regulations (29 CFR 1926) are included in this “perfect bound” book in an easy-to-read, two-color layout.
All 29 CFR 1926 regulations for construction industry are included along with the following items:
29 CFR 1903 regulations covering inspections, citations, and penalties
29 CFR 1904 regulations covering recording and reporting occupational injuries and illnesses
OSHA keyword dictionary
Easy to find OSHA interpretations