Choose a state

Building Contractors Under Four Stories (2022-05-24)

90 Questions
Minimum Passing Score of 70%
Time Allowed - 230 Minutes

The reference material listed below was used to prepare the questions for this examination.  The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available.  For Code questions, the examinations will be based only on the edition of the Code book that is listed.

These products apply to test outline dated 2022-05-24

Click Here to View the Candidate Information Bulletin Click Here to View the Candidate Information Bulletin



Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.

  • Open Book In Stock

    Blank Quick Reference Tabs

    $13.00

  • Open Book In Stock

    Gypsum Construction Handbook 7th Edtion

    Publication Year: 2014

    $75.00

    The tried-and-true Gypsum Construction Handbook is a systematic guide to selecting and using gypsum drywall, veneer plaster, tile backers, ceilings, and conventional plaster building materials. A widely respected training text for aspiring architects and engineers, the book provides detailed product information and efficient installation methodology. The Seventh Edition features updates in gypsum products, including ultralight panels, glass-mat panels, paperfaced plastic bead, and ultralightweight joint compound, and modern specialty acoustical and ceiling product guidelines. This comprehensive reference also incorporates the latest in sustainable products.

  • Open Book In Stock

    Technical Digest No. 9 - Handling and Erection of Steel Joists and Joist Girders

    3rd Edition
    Publication Year: March 2006

    $57.00

    This updated Technical Digest contains a thorough coverage of the proper handling and erection procedures to be employed in the field to make certain that SJI joist products are not damaged, that they perform as specified, and above all, to ensure the safety of the erectors. The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturer’s plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are penalized erection and common field issues. This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9. General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.

  • Open Book In Stock

    Pipe and Excavation Contracting 2011

    Publication Year: 2011

    $50.00

    This popular manual has been updated and improved to bring it more current with modern earth moving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.

  • Open Book Out of Stock

    International Energy Conservation Code 2006

    Publication Year: 2006

    $39.00

    Encourages energy conservation through efficiency in envelope design, mechanical systems, lighting systems and the use of new materials and techniques.

  • Open Book In Stock

    Carpentry and Building Construction, 2016 Student Edition

    Publication Year: 2016

    $105.00

    **IN STOCK**

    Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

  • Open Book In Stock

    ACI 530-13 Building Code Requirements For Masonry Structures

    $160.00

    The Code covers the design and construction of masonry structures while the Specification is concerned with minimum construction requirements for masonry in structures. Some of the topics covered in the Code are: definitions, contract documents; quality assurance; materials; placement of embedded items; analysis and design; strength and serviceability; flexural and axial loads; shear; details and development of reinforcement; walls; columns; pilasters; beams and lintels; seismic design requirements; glass unit masonry; veneers; and autoclaved aerated concrete masonry. An empirical design method and a prescriptive method applicable to buildings meeting specific location and construction criteria are also included.The Specification covers subjects such as quality assurance requirements for materials; the placing, bonding and anchoring of masonry; and the placement of grout and of reinforcement. This Specification is meant to be modified and referenced in the Project Manual. The Code is written as a legal document and the Specification as a master specification required by the Code.

  • Open Book In Stock

    ACI 318-14 Building Code Requirements for Structural Concrete & Commentary

    Publication Year: 2014

    $310.00

    The “Building Code Requirements for Structural Concrete” (“Code”) provides minimum requirements for the materials, design, and detailing of structural concrete buildings and, where applicable, nonbuilding structures. This Code addresses structural systems, members, and connections, including cast-in-place, precast, plain, nonprestressed, prestressed, and composite construction. Among the subjects covered are: design and construction for strength, serviceability, and durability; load combinations, load factors, and strength reduction factors; structural analysis methods; deflection limits; mechanical and adhesive anchoring to concrete; development and splicing of reinforcement; construction document information; field inspection and testing; and methods to evaluate the strength of existing structures.

  • Open Book In Stock

    SDI (Manual of Construction with Steel Deck) Edition 3

    Publication Year: 2017
    3RD Edition

    $50.00

     

    The new Third Edition of the Steel Deck Institute Manual of Construction with Steel Deck (MOC3) continues the tradition established by earlier editions to provide information necessary for the proper field usage of steel deck. This edition is reformatted for easier use with updated references, including those for the SDI QA/QC Standard for Quality Control and Quality Assurance for Installation of Steel Deck.

  • Open Book In Stock

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2024

    Publication Year: 2024

    $32.00

    The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.

  • Open Book In Stock

    BCSI: Guide to Good Practice for Handling, Installing, Restraining, and Bracing of Metal Plate Connected Wood Trusses 2018

    Publication Year: 2018

    $49.00

    BCSI includes information and guidance pertaining to diagonal bracing for web members with two rows of lateral restraint, as well as permanent lateral restraint and diagonal bracing guidance for trusses spaced wider than 2' o.c. With references to building codes, standards and OSHA regulations, BCSI consists of ten chapters that contain the most current information regarding the handling, installing, restraining, and bracing of metal plate connected wood trusses.

  • Open Book In Stock

    International Building Code 2015

    Publication Year: 2015

    $160.00

    The scope of the International Building Code (IBC) includes all buildings except detached one- and two-family dwellings and townhouses up to three stories.

  • Open Book In Stock

    International Building Code Turbo Tabs 2015

    $14.00

  • Open Book In Stock

    International Residential Code for One and Two Family Dwellings 2015

    Publication Year: 2015

    $160.00

    This comprehensive code compiles all building, plumbing, mechanical, fuel gas and electrical requirements for non-commercial one- and two-family dwellings in one convenient code. The regulations cover dwellings and townhouses up to three stories.

  • Open Book In Stock

    Contractors Guide to Quality Concrete Construction 4th Edition

    Publication Year: 2018
    4th Edition

    $125.00

    This document is published jointly by the American Concrete Institute (ACI) and the American Society of Concrete Contractors (ASCC). It has been reviewed in accordance with the Educational Committee Manual document review procedures of the ACI Educational Activities Committee. ACI and ASCC reports are intended for guidance in planning, designing, executing, and inspecting construction. This document is intended for the use of individuals who are competent to evaluate the significance and limitations of its content and recommendations and who will accept responsibility for the application of the material it contains.

    Now 262 pages – over 100 pages longer than the previous edition – the guide includes full-color photos and illustrations, a new, easier-to-read layout, and substantial content updates. Also included in the fourth edition are 43 Position Statements from ASCC, details on ACI Certification programs, and an appendix introducing several legal issues of interest to concrete contractors. A summary, review questions, and additional recommended reading list accompany each of the 12 chapters.

    Published 2018

  • Open Book In Stock

    Modern Masonry: Brick, Block, Stone 9th Edition

    Publication Year: 2020

    $125.00

    Modern Masonry: Brick, Block, Stone provides a broad understanding of the properties and applications of masonry materials. It begins with coverage on careers to help students learn about the industry. It then progresses to teaching safe and proper procedures for working with brick, block, and stone. Coverage of concrete form construction and flatwork is also included. Green features address specific topics relating to masonry’s impact on the environment.