Choose a state
C-58 (CR-58) Warm Air Heating, Evaporative Cooling and Ventilating (Residential/Commercial) (2021-04-13)
Installation, alteration, and repair of warm air heating systems, gas fired furnaces and space heaters, ventilation and evaporative cooling units, or any combination of these.
Systems may include the following areas of work and related equipment; duct work, air filtering devices, pneumatic or electrical controls, control piping, thermal and acoustical insulation, vibration insulation materials and devices, liquid fuel piping and tanks, water and gas piping from service connection to equipment it serves. Testing and balancing of air handling systems.
If necessary, a new circuit may be added to the existing service panel or sub-panel. Excluded is the installation of a new service panel or sub-panel. Excluded is the installation of a new service panel or sub-panel. The trade test is considered equivalent for these classifications and upon passing the SRE Exam (Statutes and Rules Exam), either license classification may be applied for without further testing.
60 Questions
70% Minimum Passing Score
150 Minutes
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
These products apply to test outline dated 2021-04-13Click Here to View the Candidate Information Bulletin
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.
-
Open Book In Stock
Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2024
Publication Year: 2024
$32.00
The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.
-
Open Book In Stock
International Plumbing Code Turbo Tabs 2018
Publication Year: 2018
$18.00
2018 IPC Turbo Tabs consist of clear plastic self-adhesive tabs that have key sections of the 2018 International Plumbing Code printed on them in an easy-to-read format. Can be used with either the 2018 International Plumbing Code or the 2018 IPC Code and Commentary.
-
Open Book In Stock
International Fuel Gas Code Turbo Tabs 2018
Publication Year: 2018
$18.00
2018 IFGC Turbo Tabs consist of clear plastic self-adhesive tabs that have key sections of the 2018 International Fuel Gas Code printed on them in an easy-to-read format. Can be used with either the 2018 International Fuel Gas Code or the 2012 IFGC Code and Commentary.
-
Open Book In Stock
International Mechanical Code Turbo Tabs 2018
Publication Year: 2018
$18.00
2018 IMC Turbo Tabs consist of clear plastic self-adhesive tabs that have key sections of the 2018 International Mechanical Code printed on them in an easy-to-read format. Can be used with either the 2018 International Mechanical Code or the 2018 IMC Code and Commentary.
-
Open Book In Stock
International Fuel Gas Code 2018
Publication Year: 2018
$100.00
2018 International Fuel Gas Code addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
-
Open Book In Stock
International Mechanical Code 2018
Publication Year: 2018
$100.00
2018 International Mechanical Code establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The code was developed with broad-based principles that make possible the use of new materials, methods, and design.
-
Closed Book In Stock
ACCA Manual D: Residential Duct Systems
Publication Year: 2009
$100.00
The ANSI-recognized national standard for residential HVAC duct design will help you design a duct system in less time. The popular and accurate procedure has been revised to include updated and expanded VAV guidance, with detailed examples; impacts of excess length, sag and compression in flexible ducts; and new equivalent length values for flex duct junction boxes. Manual D, from the Air Conditioning Contractors of America (ACCA), provides a single set of ANSI-recognized duct sizing principles and calculations that apply to all duct materials.
-
Closed Book In Stock
ACCA Manual J: Residential Load Calculation
8th Edition
Publication Year: 2008
$140.00
Used to determine how much heating/cooling a home needs to stay cool and dry in the summer and warm in the winter. This load calculation process was developed by engineers in the heating and air conditioning industry and has been used for decades to accurately size heating and air-conditioning equipment. After completing this load calculation process, one can choose a properly sized piece of machinery to satisfy the load.
-
Closed Book In Stock
ACCA Ductulator Slide Rule
$100.00
This durable two-sided plastic sizing wheel comes with a complete instruction manual for residential and commercial duct-sizing procedures. Designed by Hank Rutkowski.
-
Open Book In Stock
International Plumbing Code 2018
Publication Year: 2018
$100.00
The IPC provides minimum regulations for plumbing facilities in terms of both performance and prescriptive objectives, and provides for the acceptance of new and innovative products, materials, and systems. Important changes include: Updated table for the Minimum Number of Required Plumbing Fixtures. Single-user toilet facilities (a room having a single water closet and a single lavatory) are not required to be labeled for use by only a male or female (separated use designations). Solar thermal water heating systems need to conform to the ICC 900/SRCC 300 standard. Well systems are required to comply with standard NGWA-01 where local requirements do not cover subject matter or are lacking in detail on others.
-
-
Closed Book In Stock
Modern Refrigeration and Air Conditioning, 22nd Edition
$180.00
Modern Refrigeration and Air Conditioning bridges the gap between students and technicians, maintaining a high standard of quality in covering both fundamental principles and the latest technologies. This esteemed resource boasts a fresh instructional design that effectively combines theory, skill development, and service techniques to equip students with the knowledge needed to install and service refrigeration and HVAC systems. With the most current technical content, a logical and progressive structure, rich learning pedagogy, superior visuals, readability, and a focus on career and workplace readiness, it is ideal for today’s learners.