Choose a state
Concrete Pavement Contractor (2022-05-24)
100 Questions
Minimum Passing Score of 70%
Time Allowed - 240 Minutes
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
Click Here to View the Candidate Information Bulletin
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.
-
Open Book In Stock
Technical Digest No. 9 - Handling and Erection of Steel Joists and Joist Girders
3rd Edition
Publication Year: March 2006
$57.00
This updated Technical Digest contains a thorough coverage of the proper handling and erection procedures to be employed in the field to make certain that SJI joist products are not damaged, that they perform as specified, and above all, to ensure the safety of the erectors. The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturer’s plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are penalized erection and common field issues. This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9. General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.
-
Open Book In Stock
Pipe and Excavation Contracting 2011
Publication Year: 2011
$50.00
This popular manual has been updated and improved to bring it more current with modern earth moving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.
-
Open Book In Stock
Placing Reinforcing Bars, 10th Edition
$90.00
This unique and popular publication presents the best accepted current practices in placing reinforcing bars in structures and pavement. It is written for apprentices, journeymen ironworkers, and inspectors. A definitive resource for preparing provisions in project specifications. Eighteen heavily illustrated chapters cover topics including types of materials, handling of bars at the jobsite, general principles for bar placing, splicing, and tying, bar placement in footings, walls, columns, floors, roofs, pavement and transportation structures. Also includes a chapter on epoxy and other coated reinforcement.
-
Open Book In Stock
Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2024
Publication Year: 2024
$32.00
The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.
-
Open Book In Stock
Hot-Mix Asphalt Paving Handbook 2000
2nd Edition
Publication Year: 2000
$70.00
This second edition covers state-of-the-art asphalt paving, plant operations, transportation of materials, surface preparation, lay down, compaction, and quality control processes. It is aimed at field personnel who are responsible for these operations—both contractor personnel who do the work and agency personnel who oversee and inspect the work.
-
Open Book In Stock
Formwork for Concrete 8th Edition
8th Edition
$295.00
The 8th Edition, authored by David W. Johnston, North Carolina State University, is a major revision of the document to bring it up-to-date with “Guide to Formwork for Concrete (ACI 347R-14).” Revisions include referencing current standards and practices, removing outdated or irrelevant material, adding content on new developments in formwork technology and practice, and updating the look and layout of the document.
This edition considers the updated lateral pressure and other provisions now provided by ACI 347R-14. Expanded coverage is provided in SP-4 for wind loads on formwork specialized from ASCE/SEI 7-10 as modified by ASCE/SEI 37-14. The design of formwork has been divided into two chapters, one focusing on bending, shear, and deflection of wall, slab, and column formwork members, and a second focusing on shoring and bracing members. Bridge formwork considerations have been moved into a separate chapter. A new chapter summarizing the recommendations of ACI 347.3R-13, “Guide to Formed Concrete Surfaces,” has been added.
-
-
Open Book In Stock
DIPRA Installation Guide for Ductile Iron Pipe
Publication Year: 2015
This book is full of useful information for designers and installers of Ductile Iron pipe. It covers many aspects of pipeline installation such as receiving and handling, trenching, installing, back-filling, testing and disinfecting, and service taps. It also contains a variety of useful miscellaneous information such as a listing of Ductile Iron pipe standards, common conversion factors and dimensions, and weights of push-on and mechanical joint pipe. A convenient pocket-size version of this Guide is available.
*THIS BOOK IS NO LONGER IN PRINT AND IS NO LONGER AVAILABLE TO PURCHASE
-
Open Book In Stock
Pipe Welding Procedures
2nd Edition
Publication Year: 2003
$95.00
A standard reference for decades, this new edition of Pipe Welding Procedures continues to reinforce the welder's understanding of procedures. Drawing on his extensive practical and teaching experience in the field, the author describes in detail the manipulating procedures used to weld pipe joints. You will find useful information on heat input and distribution, essentials of shielded metal-arc technology, distortion, pipe welding defects, welding safety, essentials of welding metallurgy, and qualification of the welding procedure and the welder.
-
Open Book In Stock
Pipefitter's Handbook, 1967 3rd Edition
3rd Edition
Publication Year: 1967
$55.00
Compact and pocket-sized, this handy reference contains thousands of facts and figures relevant to pipefitters, steamfitters-anyone concerned with layout and installation of pipe.
-
Open Book In Stock
Concrete Pipe and Box Culvert Installation Manual 2015
Publication Year: 2015
$50.00
This manual presents a guide for the proper installation of concrete pipe. While focusing on the construction of the pipesoil system, this manual also addresses those factors critical to the completion of the entire system, from delivery of the concrete pipe to the jobsite, to the acceptance of the installed pipeline. This manual is intended as a guide and is not to supersede the project specifications.
-
Open Book In Stock
Design and Control of Concrete Mixtures 17th Edition
Publication Year: 2021
17th Edition
$135.00
Design and Control of Concrete Mixtures, 17th Edition is the definitive guide for engineers, contractors, producers, instructors, and students. This new edition reflects the latest advances in concrete technology and highlights concrete’s contribution to sustainability. Provides guidance on all aspects of concrete technology from selection of suitable materials to designing and proportioning a concrete mixture.
Backed by over 100 years of research by the Portland Cement Association and other industry groups.
Reflects the latest guidance on standards, specifications, and test methods of ASTM International (ASTM), the American Association of State Highway and Transportation Officials (AASHTO), and the American Concrete Institute (ACI).
Presenting a 40% increase in new information, including two new chapters on imperfections in concrete and innovations in concrete technology.
-
Open Book In Stock
ASME B31.8 Gas Transmission and Distribution Piping Systems 2014
Publication Year: 2014
$339.00
ASME's B31.8 Gas Transmission and Distribution covers the design, fabrication, installation, inspection, testing, and other safety aspects of operation and maintenance of gas transmission and distribution systems, including gas pipelines, gas compressor stations, gas metering and regulation stations, gas mains, and service lines up to the outlet of the customer’s meter set assembly. The scope of this Code includes gas transmission and gathering pipelines, including appurtenances, that are installed offshore for the purpose of transporting gas from production facilities to onshore locations; gas storage equipment of the closed pipe type that is fabricated or forged from pipe or fabricated from pipe and fittings, and gas storage lines.
-
Open Book In Stock
Training Certification of Field Personnel For Unbonded Post Tensioning
3rd Edition
Publication Year: 2003
$95.00
This instructional manual has been prepared by the Post-Tensioning Institute's Committee for Training and Certification of Field Personnel for Unbonded Post-Tensioning soley as a recommended general guide and assistance to the placement, installation and inspection of unbonded single strand post-tensioning systems, the operation of stressing equipment, and accessories.